With the wealth of features and capabilities in routers nowadays, configuring comprehensive monitoring is not a trivial – or quick – task. Unless you’re using LogicMonitor. If you are, configuring comprehensive monitoring for Juniper routers consists of entering the hostname. That’s it.
LogicMonitor will then automatically detect and monitor:
all with no effort on your part, and all kept up to date automatically.
A fundamental thing for every monitoring system, yet LogicMonitor even does this better. Automatically tracking bps, packets per second, and discards, errors and queuing, and allowing the trending of data from the last few minutes to a year ago – and automatically constructing top 10 graphs, so you can see at a glance your busiest interfaces.
Your routers need good airflow to prolong their life and perform well. Today’s routers can easily have over 40 individual sensors – all of which should be monitored. Tedious to set up – unless you use LogicMonitor.
LogicMonitor will automatically detect, monitor and alert on the state of any components in – or added to – your Juniper router. It will alert you to failures, or switchovers between redundant components – without you having to set up anything.
LogicMonitor will automatically detect, monitor and alert on the CPU and memory loads for each card, keeping track as you add and remove line cards. So you don’t have to.
Detect interfaces that support digital optical monitoring, and warns of high and low laser power states, module temperatures, or laser bias issues.
Performance monitoring for all your infrastructure & applications. In minutes, not hours.
Questions? Call Us!
(888) 415-6442 or +1 (805)-617-3884
©2008-2014 LogicMonitor, Inc. LogicMonitor® is a registered trademark of LogicMonitor, Inc.