LogicMonitor’s Dell EMC VNX/Clariion SAN monitoring package leverages the Navisphere CLI tool. It monitors and alerts on a wide variety of health and performance metrics. LogicMonitor’s EMC VNX package is compatible with Clariion and VNX devices using Navisphere CLI version 7.32 or later. Requirements Import the LogicMonitor_Collector_Snippets DataSource to ensure that your collector supports the … Continued

EMC Isilon systems provide instrumentation via SNMP. As such, LogicMonitor Auto-Properties subsystem automatically discovers these devices and adds Isilon to the system.categories device property. An exception is that in Isilon clusters we’re not able to automatically discover the master node. In this case you’ll need to add IsilonMaster to that device’s system.categories property. These are … Continued

Pure Storage develops all-flash data storage hardware and software products. LogicMonitor offers a suite to monitor performance statistics for Pure Storage arrays. Compatibility As of September 2020, LogicMonitor’s Pure Storage package is compatible with Pure Storage devices exposing the Pure Storage REST API version 1 (1.5 and later); version 2.x is not currently supported. All … Continued

Getting monitoring for HP P4000 SANs has three steps: Add all the NSM nodes to LogicMonitor. Ensure that snmp is enabled on the SAN management group. If you have changed the community from the default of public ensure that you set the snmp.community LogicMonitor property on the NSM nodes (or the LogicMonitor group they are … Continued

Overview LogicMonitor’s HPE Nimble monitoring package leverages SSH and SNMP to monitor various metrics pertaining to disks, volumes, arrays, and general system health. Compatibility As of August 2020, LogicMonitor’s HPE Nimble package is known to be compatible with: Setup Requirements Satisfy Dependencies Some of the LogicModules in this package use SNMP for data collection and … Continued

Quantum tape libraries (such as the Scalar i80) automatically have the tape drives, libraries and hardware monitoring discovered. However, they identify themselves as reporting other standard metrics (CPU load, etc) that they do not in fact support. While it does no harm to leave these datasources enabled, it is neater to disable them. The datasources … Continued

Overview There are two kinds of data collection methods used for monitoring NetApp Fabric Attached Storage (FAS) systems (also commonly referred to as Filers): NetApp API SNMP For comprehensive monitoring, both NetApp API and SNMP access must be configured. This article will walk you through setup and configuration for the various available NetApp modes: Cluster … Continued