Selenium Monitoring Setup

You can monitor your websites by setting up Selenium on your LogicMonitor setup by installing a reachable Selenium Grid and configuring your Collector. This enables seamless integration of Selenium Webchecks and synthetic performance insights directly in your LogicMonitor portal.

Setting up Selenium monitoring involves the following:

1. Installing the Selenium Grid 
2. Updating the LogicMonitor Collector for Synthetics

General Requirements for Setting up Selenium

To set up Selenium Synthetics with LogicMonitor, you need the following:

• Selenium Grid 4
  For information, see Selenium Grid 4 from Selenium documentation.
• LogicMonitor Collector 34.100 or later

Installing the Selenium Grid 

You can install the Selenium Grid in the following two ways:

• Installation of Selenium Grid in a Container 
  For more information, see Installing the Selenium Grid in a Container.
• Installing the Selenium Grid Locally
  For more information, see Installing the Selenium Grid Locally.

Updating the LogicMonitor Collector for Synthetics

1. In LogicMonitor, navigate to Settings > Collectors > select the Collector that has access to the Selenium Grid
2. Select the against the collector and then select Collector Configuration.
3. In the Agent Config tab, enter the Selenium Grid URL to the synthetics.selenium.environment.grid.url property.
   
4. Select Save and Restart.
   The Collector restarts with the Selenium Webcheck assigned to it.