Collector Versions

Last updated on 03 October, 2024

You can use the Collector Update Scheduler to perform a one-time update to your LogicMonitor Collectors or to automate receipt of the most recent Collector updates at desired times.

Collector Release Tracks

Collector releases are categorized into three release tracks:

  • Early Access (EA) – EA releases are often the first to debut new functionality. We sometimes release a major feature in batches through EA release. So, EA is not recommended for your entire infrastructure. They occur 9-10 times per year. If there are major bug fixes, we patch EA, and it is referred as EA patch release. A stable EA version is designated as an optional general release (GD).
  • Optional General Releases (GD) – GD releases are stable collector updates that may have new features. However, it is not mandatory to update collectors with GD releases. They occur twice a year. If there are major bug fixes, we patch GD, and it is referred as GD patch release. A stable GD version is designated as Required General Release (MGD).
  • Required General Releases (MGD) – An MGD is released once a year. When we designate a GD as an MGD, we schedule and announce a date to auto-upgrade collectors to the MGD version. To let customers upgrade collectors as per their convenience, we send communication at least 30 days before the scheduled auto-upgrade date. On the auto-upgrade date, we upgrade only those collectors which are still below the MGD version. Thus, going forward, the MGD becomes the minimum required version. If there are major bug fixes, we patch MGD, and it is referred as MGD patch release.

Release Version Conventions

You can differentiate between an EA collector and a GD collector by observing the release version number.

  • All EA versions start with NN.100, where NN is the major version number. In subsequent releases, we increment the decimal. For example, EA 32.100, EA 32.200, and so on. In case of a patch to an EA, for example, patch to EA 33.100 is versioned as EA 33.101
  • All GD versions start with NN.000 where NN is the major version number. A GD release is followed by EA releases (usually 4-5 EA releases). So, in the subsequent releases, we increment the decimal. For example, after GD 32.000 is released, we will release EA 32.100, EA 32.200, EA 32.300, and so on. In case of a patch to a GD, the decimal number will always be below “.100”. For example, patch to GD 32.000 is versioned as GD 32.001
  • All MGD versions take the version number of the GD it is based on. For example, MGD 31.004 is based on the previously released GD 31.004

To understand collector releases and their versions, refer to the following example. Note that the version numbers are used for representation only.

Release VersionDetails
EA 31.400EA release
GD 32.000GD release
EA 32.100EA release
EA 32.200EA release
GD 32.001Patch to GD 32.000
GD 32.002Patch to GD 32.001
EA 32.101Patch to EA 32.100
EA 32.300EA release
MGD 32.002GD 32.002 is designated as the MGD
EA 32.400EA release
GD 33.000GD release

Collector Releases

For a summary of the key features included in each Collector version, see the following table. For a detailed description of what is included in each Collector release, view its dedicated version page.

Active Collector Releases

Version Type Release Date JRE Version Highlights
36.300 Early Access October 03, 2024 jre_amazon_11.0.24.8.1
  • Improvements to the nonrootenhancements.sh file
  • Improvements to the Ping Functionality
  • Addition of Resource Property
See EA Collector – 36.300 for a complete list of enhancements and fixes.
36.001 Optional General Release September 04, 2024 jre_amazon_11.0.22.7.1
  • Improvements to collector live host reporting
  • Support for processing and storing NBAR2 data asynchronously
See GD Collector – 36.001 for a complete list of updates.
35.003 Required General Release August 12, 2024 jre_amazon_11.0.19.7.1
  • MGD Collector 35.003 force update is scheduled on September 18, 2024.
See MGD Collector – 35.003 for a complete list of enhancements.
36.200 Early Access August 07, 2024 jre_amazon_11.0.23.9.1
  • Static Bearer Token Authentication Enabled for HTTPS Publisher
  • New Wrapper Log Components for LogSource Flows
See EA Collector – 36.200 for a complete list of enhancements and fixes.
36.100 Early Access July 01, 2024 jre_amazon_11.0.23.9.1
  • Support for LogicMonitor Data Publisher Service with HTTPS client
  • Support for BatchScript ConfigSource configuration
  • Ingesting SNMP v1 and v2c traps without validation
  • Access control for enhanced security
See EA Collector – 36.100 for a complete list of enhancements and fixes.
36.000 Optional General Release June 05, 2024 jre_amazon_11.0.22.7.1
  • Renamed the debug command to !winrm
  • Implemented access control for enhanced security
See GD Collector – 36.000 for a complete list of updates.

Archived Collector Releases

Version Type Release Date Highlights
35.003 Optional General Release July 02, 2024

jre_amazon_11.0.19.7.1

  • Fixed minor technical issue
See GD Collector – 35.003 for a complete list of updates.
35.002 Optional General Release June 03, 2024

jre_amazon_11.0.19.7.1

  • Renewed LMSignCert
  • Fixed collector script cache issue
See GD Collector – 35.002 for a complete list of updates.
35.401 Early Access May 22, 2024

jre_amazon_11.0.22.7.1

  • Fixed minor technical issue
See EA Collector – 35.401 for a complete list of enhancements and fixes.
35.400 Early Access April 29, 2024

jre_amazon_11.0.22.7.1

  • Launched LogicMonitor Data Publisher Service
  • Launched MIBs to JSON Converter Utility
  • Auto Conversion of Linux Collectors to Non-root Users during Upgrade
  • Renewed LMSignCert
  • SNMP Trap Translation Improvements
See EA Collector – 35.400 for a complete list of enhancements and fixes.
35.301 Early Access March 12, 2024

jre_amazon_11.0.21.9.1

  • Fixed an issue where collector failed to ingest Syslogs due to 403 and 402 status codes
See EA Collector – 35.301 for a complete list of enhancements and fixes.
35.300 Early Access March 05, 2024

jre_amazon_11.0.21.9.1

  • You can now use the PowerShell script updateToNonAdmin.ps1 to migrate Windows collector running as admin to run as non-admin user
  • Added matrices for monitoring ingestion of SNMP traps as LM Logs.
  • Fixed an issue of missing logs.
See EA Collector – 35.300 for a complete list of enhancements and fixes.
35.001 Optional General Release February 13, 2024

jre_amazon_11.0.19.7.1

  • Fixed collector performance issue that occurred after upgrading to GD 35.000.
  • Fixed an issue where the collector failed to downgrade from GD 35.000 and EA 35.200 to a previous version.
See GD Collector – 35.001 for a complete list of updates.
35.200 Early Access January 25, 2024

jre_amazon_11.0.21.9.1

  • Deprecated the Configure application in Windows collector.
  • Added Regex group support to resource mapping for Syslog LogSource.
  • Added the Enable for default log collection option on the Add Collector page.
  • Fixed an issue related to Topology source feed parsing.
See EA Collector – 35.200 for a complete list of enhancements and fixes.
35.100 Early Access December 19, 2023

jre_amazon_11.0.21.9.1

  • Upgraded version of Amazon JAVA Corretto.
  • Fixed minor security issues.
  • SNMP Traps, Syslog, Windows Event Logging, and Script type LogSource now support the OR operator for resource mapping.
See EA Collector – 35.100 for a complete list of enhancements and fixes.
35.000 Optional General Release December 18, 2023

jre_amazon_11.0.19.7.1

  • Fixed security issue related to collector debug command and wrapper log.
See GD Collector – 35.000 for a complete list of updates.
34.500 Early Access November 01, 2023

jre_amazon_11.0.19.7.1

  • Collector now supports a new LogSource type ‘SNMP Trap’.
  • In addition to Groovy lib v2, collector now also supports Groovy lib v4.
  • Increased the scope of certain SNMP properties to be compatible with both SNMP v2c and v3.
See EA Collector – 34.500 for a complete list of enhancements and fixes.
34.004 Optional General Release October 16, 2023

jre_amazon_11.0.18.10.1

  • Fixed an issue where the script for PropertySources failed due to credential vault enhancements done in the previous release.
See GD Collector – 34.004 for a complete list of updates.
33.007 Required General Release October 06, 2023

jre_amazon_11.0.16.8.1

  • Fixed Linux collector upgrade issue.
See MGD Collector – 33.007 for a complete list of enhancements and fixes.
34.400 Early Access October 05, 2023

jre_amazon_11.0.19.7.1

  • Fixed an issue where the script for PropertySources failed due to vault enhancements done in the previous release.
  • Stopped supporting the CSProxy feature in collector.
  • Improved Delinea (previously Thycotic) Vault integration to fetch secrete values in multiple key-value pairs.
See EA Collector – 34.400 for a complete list of enhancements and fixes.
34.003 Optional General Release September 18, 2023

jre_amazon_11.0.18.10.1

  • The Selenium Synthetics Step Monitoring feature is added to GD Collector 34.003.
See GD Collector – 34.003 for a complete list of updates.
34.300 Early Access August 07, 2023

jre_amazon_11.0.19.7.1

  • Added max thread pool size parameter for Windows events and Syslog.
  • Improved the Heap and Non-heap memory of small and medium size collectors for SNMP v2c.
  • Upgraded version of some JAR files for minor security updates.
See EA Collector – 34.300 for a complete list of enhancements and fixes.
34.002 Optional General Release June 29, 2023

jre_amazon_11.0.18.10.1

  • Fixed collector upgrade issue that stopped working of the ping DataSource.
  • Fixed collector upgrade issue that led to re-importing obsolete CAs in the upgraded JRE.
See GD Collector – 34.002 for a complete list of fix.
34.200 Early Access June 29, 2023

jre_amazon_11.0.19.7.1

  • Added reversal scripts to roll back WinRM configuration.
  • Added Dynamic Regex Group method to SysLog LogSource field mapping.
  • Fixed an issue where WMI query was run with empty credentials.
See EA Collector – 34.200 for a complete list of enhancements and fixes.
34.001 Optional General Release June 06, 2023

jre_amazon_11.0.18.10.1

  • Fixed issue that led to spike in SPSE and PowerShell task time out by reverting addition of host properties to hashtable/environmental variables.
See GD Collector – 34.001 for details.
34.100 Early Access June 01, 2023

jre_amazon_11.0.18.10.1

  • Introduced WinRM based solution to install Windows collectors without administrator privilege.
  • Added a new module status for collector health check scripts.
  • Separated credentials for SNMP traps and SNMP polling.
See EA Collector – 34.100 for a complete list of enhancements and fixes.
33.401 Early Access May 23, 2023

jre_amazon_11.0.18.10.1

  • Support to access the new Selenium Synthetics Step Monitoring feature.
See EA Collector – 33.401 for details of the enhancement.
34.000 Optional General Release May 17, 2023

jre_amazon_11.0.18.10.1

  • Fixed issue where collector crashed due to cache corruption in LiveHost.
  • Upgraded Snippet JAR from version 1.5.3 to 1.8.2
See GD Collector – 34.000 for a complete list of fix.
33.400 Early Access April 06, 2023

jre_amazon_11.0.18.10.1

  • Added Add additional SNMP v3 Credentials checkbox under Advanced NetScan for the ICMP ping method to provide multiple SNMP v3 credentials.
  • Upgraded version of some files for various minor security updates.
  • Added a new module status SignatureValueChangedForHealthCheckScripts for collector health check scripts.
See EA Collector – 33.400 for a complete list of enhancements and fixes.
33.301 Early Access March 06, 2023

jre_amazon_11.0.17.8.1

  • Fixed issues that led to high CPU spike and errors during data collection.
See EA Collector – 33.301 for a complete list of enhancements and fixes.
33.300 Early Access February 22, 2023

jre_amazon_11.0.17.8.1

  • Added the service.read_timeout_getconf property to the agent.conf setting.
  • Upgraded version of some files for various minor security updates.
See EA Collector – 33.300 for a complete list of enhancements and fixes.
33.200 Early Access January 16, 2023

jre_amazon_11.0.17.8.1

  • Upgraded version of some files for various minor security updates.
  • Fixed an issue where IPMI datasource and iDRAC monitoring could not collect data.
See EA Collector – 33.200 for a complete list of enhancements and fixes.
33.101 Early Access November 24, 2022

jre_amazon_11.0.16.8.1

  • Mitigated the risk of performance and availability impact on production Oracle environments by temporarily rolling back Oracle JDBC jar from version 21.5.0.0 to 11.2.0.3.0.
See EA Collector – 33.101 for a complete list of enhancements and fixes.
33.100 Early Access November 15, 2022

jre_amazon_11.0.16.8.1

  • Upgraded jsoup 1.14.2 to version 1.15.3 to mitigate vulnerabilities
  • Added LogSource logging support in Collector for logsource.kubernetes and logsource.collectoringestapi components
  • Introduced HostProps as an environment variable
See EA Collector – 33.100 for a complete list of enhancements and fixes.
33.007 Optional General Release September 04, 2023
  • Fixed issue related to Linux collector upgrade to GD Collector 33.006.
See GD Collector – 33.007 for a complete list of fix.
33.006 Optional General Release July 03, 2023
  • Fixed collector upgrade issue that led to re-importing obsolete CAs in the upgraded JRE.
See GD Collector – 33.006 for a complete list of fix.
33.005 Optional General Release June 06, 2023
  • Fixed issue that led to spike in SPSE and PowerShell task time out by reverting addition of host properties to hashtable/environmental variables.
See GD Collector – 33.005 for details.
33.004 Optional General Release May 02, 2023
  • Fixed issue where collector crashed due to cache corruption in LiveHost.
See GD Collector – 33.004 for a complete list of fix.
33.003 Optional General Release April 12, 2023
  • Fixed issues faced while upgrading collector from root to non root.
  • Fixed issues related with ping DataSource and ping debug command.
See GD Collector – 33.003 for a complete list of enhancements and fixes.
33.002 Optional General Release February 20, 2023
  • Increased the thread count of collectors of different sizes.
  • Fixed GD 33.001 upgrade related issues.
See GD Collector – 33.002 for a complete list of enhancements and fixes.
33.001 Optional General Release November 23, 2022
  • Mitigated the risk of performance and availability impact on production Oracle environments
  • Upgraded some jar versions as part of minor security updates
  • Fixed WMI password related issue
See GD Collector – 33.001 for a complete list of enhancements and fixes.
33.000 Optional General Release November 10, 2022
  • Fixed WMI password related security issue
  • Upgraded hsqldb jar to version 2.7.1
See GD Collector – 33.000 for a complete list of enhancements and fixes.
32.004 Optional General Release November 01, 2022
  • Fixed wmi password related security issue.
See GD Collector – 32.004 for a complete list of enhancements and fixes.
32.400 Early Access September 22, 2022
  • Upgraded Corretto JRE version to 11.0.16.8.1
  • Discontinued the support for jt400-full-6.0.jar (IBM iSeries/AS400 JAR)
  • Improved the Enhanced Script NetScan feature
See EA Collector – 32.400 for a complete list of enhancements and fixes.
32.003 Optional General Release September 20, 2022
  • Applied a fix that resolves the null pointer exception when upgrading Collector.
See GD Collector – 32.003 for details.
31.004 Required General Release August 30, 2022
  • Upgraded log4j to version 2.17.1 to mitigate the log4j vulnerabilities.
  • Upgraded Fastjson to version 1.2.83 to mitigate the Fastjson “Auto Type Bypass” CVE-2022-25845 RCE vulnerability.
See MGD Collector – 31.004 for a complete list of enhancements and fixes.
32.002 Optional General Release August 29, 2022
  • Upgrade to Postgresql version 42.4.1 to mitigate CVE-2022-31197 security vulnerability in the JDBC jar file for postgres.
  • Patch to a fixed issue where Collector took more time to upgrade resulting in Collector down alert.
See GD Collector – 32.002 for a complete list of enhancements and fixes.
32.300 Early Access August 9, 2022
  • Improved Advance NetScan by adding a new Enhanced Script NetScan method.
  • Upgraded fastjson to version 1.2.83 to mitigate CVE-2022-25845 vulnerability.
  • Made changes to support systemd/system as the default Daemon directory to support the CentOS Stream versions.
See EA Collector – 32.300 for a complete list of enhancements and fixes.
32.001 Optional General Release June 29, 2022
  • To mitigate the Fastjson “Auto Type Bypass” CVE-2022-25845 RCE vulnerability, we have upgraded Fastjson to version 1.2.83.
See GD Collector – 32.001 for a complete list of enhancements and fixes.
31.004 Optional General Release June 29, 2022
  • To mitigate the Fastjson “Auto Type Bypass” CVE-2022-25845 RCE vulnerability, we have upgraded Fastjson to version 1.2.83.
See GD Collector – 31.004 for a complete list of enhancements and fixes.
32.200 Early Access June 27, 2022
  • In addition to CyberArk single account, we have now extended support to CyberArk dual account.
  • LogicMonitor now automates the OSS license report generation process.
  • To mitigate the Fastjson “Auto Type Bypass” CVE-2022-25845 RCE vulnerability, we have upgraded Fastjson to version 1.2.83.
See EA Collector – 32.200 for a complete list of enhancements and fixes.
32.100 Early Access June 03, 2022
  • Added a new toggle on the Netscan UI.
  • Configure Netscan policies individually to include or exclude network and broadcast addresses when scanning CIDR ranges.
See EA Collector – 32.100 for a complete list of enhancements and fixes.
32.000 Optional General Release June 03, 2022
  • LogicMonitor Collector now monitors and identifies changes in the jar files shipped during the Collector installation. Changes are highlighted on the Collector status page.
  • Added new Netflow configurations.
See GD Collector – 32.000 for a complete list of enhancements and fixes.
31.200 Early Access March 31, 2022
  • Added and updated Netflow configurations.
  • Upgraded Amazon Java Corretto to version 11.0.14.10.1.
  • Added new properties to the JDBC data collection settings in the agent.conf file.
See EA Collector – 31.200 for a complete list of enhancements and fixes.
31.100 Early Access February 17, 2022
  • Added support for three new LogicModules: Windows Events Logs Collection, Kubernetes Events, and Kubernetes Pod Logs.
  • Added the ability to select more than one label for instance definitions in the OpenMetrics wizard.
See EA Collector – 31.100 for a complete list of enhancements and fixes.
30.003 Optional General Release February 17, 2022
  • Upgraded log4j to version 2.17.1 to mitigate the log4j vulnerabilities.
See GD Collector – 30.003 for a complete list of enhancements and fixes.
31.003 Optional General Release January 17, 2022
  • Upgraded log4j to version 2.17.1 to mitigate the log4j vulnerabilities.
See GD Collector – 31.003 for a complete list of enhancements and fixes.
31.002 Optional General Release December 21, 2021
  • Upgraded log4j to version 2.17 to mitigate the log4j vulnerabilities.
See GD Collector – 31.002 for a complete list of enhancements and fixes.
30.002 Required General Release December 17, 2021
  • Upgraded log4j to version 2.16 to mitigate the Log4shell vulnerabilities.
See MGD Collector – 30.002 for a complete list of enhancements and fixes.
31.001 Optional General Release December 16, 2021
  • Upgraded log4j to version 2.16 to mitigate the Log4shell vulnerabilities.
See GD Collector – 31.001 for a complete list of enhancements and fixes.
31.000 Optional General Release November 26, 2021
  • Includes all features and fixes from the EA Collector 30.xxx versions
  • Updated Java to Amazon Corretto 11.0.13.8.
See GD Collector – 31.000 for a complete list of enhancements and fixes.
30.104 Early Access October 19, 2021
  • Certified the Collector to run on RHEL OpenShift.
  • Added TCP support for Syslog log collection.
  • Added performance enhancements to the OpenMetrics Collector.
See EA Collector – 30.104 for a complete list of enhancements and fixes.
30.001 Optional General Releases August 23, 2021
  • Fixed an issue with the commons-codec library that was causing issues with updated collectors.
  • Fixed issue with MongoDB driver dependencies. It is now properly upgraded to version 4.1.0
See GD Collector – 30.001 for a complete list of enhancements and fixes.
30.102 Early Access July 20, 2021
  • Added Beta Support for the new Thycotic Secret Server as part of the Credential Vault Integration.
  • Added the functionality to change the Collector Size setting during installation.
See EA Collector – 30.102 for a complete list of enhancements and fixes.
30.101Early AccessJune 9, 2021
  • Added support for High Security mode (HSM). Users can choose to install in HSM or Orchestration Compatibility Mode (OCM). The default is OCM.
  • Added functionality to override openmetrics.url property with openmetrics.host or system.hostname properties when the URL isn’t provided.
See EA Collector – 30.101 for a complete list of enhancements and fixes.
30.000Optional General ReleasesApril 29, 2021 Incorporates all enhancements and fixes found in GD 29.003, as well as EA 29.xxx (29.101, 29.102, 29.104, 29.105, 29.106, 29.107, 29.108, and 29.109).

See GD Collector – 30.000 for a complete list of enhancements and fixes.
30.100Early AccessApril 20, 2021
  • Added support for new OpenMetrics collection.
  • Added support for Windows Events Logs and Kubernetes Events collection and forwarding to LM Logs
  • Added JMX metrics for monitoring the CyberArk AAM Credential Vault integration.
See EA Collector – 30.100 for a complete list of enhancements and fixes.
29.109Early AccessMarch 30, 2021Fixed an issue in EA 29.107 where upgrading failed if the Collector is running as root.

See EA Collector – 29.109 for a complete list of enhancements and fixes.
29.108Early AccessMarch 11, 2021Added integration support for external credential management using CyberArk Vault.

See EA Collector – 29.108 for a complete list of enhancements and fixes.
29.107Early AccessMarch 9, 2021See EA Collector – 29.107 for a complete list of enhancements and fixes.
29.106Early AccessFebruary 10, 2021
  • Fixes the known issue present in versions 29.101 through 29.105 that was resulting in resources with heartbeats to be incorrectly marked as dead/down.
  • Updated to no longer require changes to /etc/sudoers for non-root installation.
  • JMX metrics added for LM Logs.
See EA Collector – 29.106 for a complete list of enhancements and fixes.
29.105Early AccessDecember 9, 2020
  • Adds support for parsing RFC 3164 and RFC 5424 formatted log events.
  • Introduces several new properties for tuning Web Checks.
See EA Collector – 29.105 for a complete list of enhancements and fixes.
29.104Early AcessOctober 10, 2020
  • Support for forwarding syslog to LM Logs. See Collecting and Forwarding Syslog Logs.
  • Upgraded Amazon Java Corretto to 11.0.9.11.1 (October 2020 quarterly update).
  • Support for the Suppress duplicate EventIDs even when messages differ option has been added.
See EA Collector – 29.104 for a complete list of enhancements and fixes.
29.003Optional General ReleasesSeptember 29, 2020
  • Upgraded the JRE to Amazon Corretto 11.0.8.10.1
See GD Collector – 29.003 for a complete list of enhancements and fixes.
29.102Early AccessSeptember 15, 2020
  • Adjusted the output text width of Collector debug information, making Java exception text easier to read.
  • Removed several Java libraries from the Collector.
See EA Collector – 29.102 for a complete list of enhancements and fixes.
29.002Optional General ReleasesAugust 17, 2020Fixes an issue causing web page collection tasks to get held up and consume CPU.
29.101Early AccessAugust 6, 2020
  • Upgraded the JDK to Amazon Corretto 11.0.8.10.1.
  • NetScan Groovy scripts are now run in the SSE.
  • NBAR slots support for Direction, IPv6, Application.
See EA Collector – 29.101 for a complete list of enhancements and fixes.
29.001Optional General ReleasesJuly 15, 2020Collector version GD 29.001 fixes an issue in GD 29.000 that prevented the successful upgrade to GD 29.000 from an EA 28 version (28.400 – 28.607) of a Linux Collector running as a non-root user.
29.000Optional General ReleasesJuly 6, 2020Collector version GD 29.000 incorporates all enhancements and fixes found in M/GD 28.005, as well as EA 28.xxx (28.100, 28.200, 28.300, 28.400, 28.500, 28.501, 28.600, 28.601, 28.602, 28.603, 28.604, 28.605, 28.606, 28.607). Visit the individual release notes pages for more information.
29.100Early AccessJune 24, 2020
  • Introduces XL and XXL size collectors for 16 and 32 GiB of RAM.
  • Introduces the Collector Script Cache to allow caching of things like session tokens between collection intervals, without dumping things on the filesystem.
  • Added scripts to allow the migration of a Collector running as root or Administrator to a non-root or non-Administrator user.
  • TinyRADIUS Java Library is now included. LogicModules that utilize these to test RADIUS login will be available in a future release.
See EA Collector – 29.100 for a complete list of enhancements and fixes.
28.607Early AccessMay 27, 2020Enhancements:

Updated the Collector JRE to Amazon Corretto version 11.0.7.10 (April 2020 patch)

Fixes:

Fixed an issue where AES-256 SNMPv3 was not working with some Cisco devices
28.606Early AccessMay 7, 2020Improvements:
  • Added SHA2 support for SNMPv3
  • Added SSHJ library as an option for Expect. This includes more ciphers, algorithms, and key exchanges, including the 4096 bit Diffie-Hellman group
  • Updated MariaDB driver to mariadb-java-client-2.5.4.jar
  • Improved logging for remote sessions
Fixes:
  • Fixed issue in the Linux installer that was preventing the Collector from starting when installed as non-root on some machines
28.005Required General ReleasesMay 5, 2020Improvements:
  • PropertySource support for token replacement in PowerShell scripts
  • Support for NTLMv2 authentication via the wmi.authType property
  • More insightful error messages and diagnosis when using the Poll Now functionality
  • Remote Session support via Collectors configured to use proxies
  • Improved metrics for SSE and Collector performance monitoring
  • Collector logging cleanup
  • Topology mapping support
Fixes:
  • Accurate parsing of Cisco syslog messages lacking a host for Syslog EventSources
  • SSL validation issue fix that was preventing successful Groovy script execution
28.605Early AccessMarch 19, 2020Improvements:
  • Upgraded the MS SQL jar to mssql-jdbc-7.4.1.jre11.jar
  • Improved memory usage on the syslog Collector
  • Added a log event for when the SSE fails to start
  • Internal improvements to the Collector reporting mechanism
Fixes:
  • Fixed message parsing issue that was preventing the ##MESSAGE## token from rendering appropriate contents when a Windows event was generated
28.604Early AccessJanuary 8, 2020Improvements: 

  • Updated the JDK to Amazon Corretto 11.0.5.10.1 (October 2019 Critical Patch Update).

Fixes:

  • Fixed NetFlow aggregation edge case with invalid port “0” would cause display issues in the Traffic tab.
  • Fixed issue introduced in 28.003 that would break Batchscript collection if the instance identifier contained a “.”
  • Fixed issue that would cause Ping check to errantly return status 24 in edge cases.
28.004Optional General ReleasesOctober 25, 2019Fixes:
 

  • Fixed issue introduced in 28.003 that would break Batchscript collection if the instance identifier contained a “.”
28.003Optional General ReleasesOctober 15, 2019Improvements: 

  • Improved performance for Batchscript DataSources with very large numbers of instances.

Fixes:

  • Fixed issue that would cause Ping check to errantly return status 24 in edge cases.
    • Backported from EA 28.500
28.603Early AccessSeptember 5, 2019Improvements:
 

  • Updated the Corretto JRE to 11.0.4
28.602Early AccessAugust 8, 2019Fixes:
 

  • Fixed a bug that would cause JDBC Active Discovery to ignore the “Port # List” field.
28.601Early AccessJuly 24, 2019Fixes:
 

  • Fixed issue with watchdog that would prevent the collector configuration from being edited in the UI
  • NOTE: If you’re upgrading from 28.600, the watchdog issue above will prevent a normal upgrade. There are two options to workaround the watchdog bug to update to 28.601:
    • Uninstall the collector from its host, download collector 28.601 from the portal (you don’t need to delete or recreate the collector object in LogicMonitor) and install it on the host.
    • Open the collector debug window and run the !restart command to restart the collector. This will temporarily fix the environment (until the next automated collector credential rotation) and allow you to upgrade via the portal.
      • Restarting the collector via the drop-down UI menu won’t work for the workaround, it must be the debug command
28.600Early AccessJuly 5, 2019Fixes:
 

  • Fixed issue with Collector signing that could:
    • Cause false positives from anti-virus software
    • Block collection and reporting tasks
28.501Early AccessJune 21, 2019Fixes:
 

  • Fixed issue with Collector signing that could:
    • Cause false positives from anti-virus software
    • Block collection and reporting tasks
28.500Early AccessJune 14, 2019Improvements: 

  • Collector installer now uses Bash and interfaces with systemd. If you download 28.500 on v120 it will still use Perl.
  • !logsurf debug command will now show details for Test Script.
  • PIDs are now logged for troubleshooting external scripts.

Fixes:

  • Fixed bug that broke SNMP collection when two resources have the same IP address and different host names.
  • Avoid potential false No Data reported for Ping data collection when restarting Collector.
  • Fixed issue that would cause some NetFlow v9 data to be discarded in some circumstances.
  • Fixed issue that would cause Ping check to errantly return status 24 in edge cases.
  • Fixed a memory leak in the syslog collector.
  • Fixed bug that would cause JDBC collection to fail if special characters were in the URL.
28.400Early AccessMay 23, 2019Improvements: 

  • Added support for Test EventSource (SNMP trap, syslog, logfile) functionality
  • Collector now runs on Amazon’s Corretto JDK 11
    • Notes:
      • With this change, we’ve dropped support for 32-bit operating systems
      • At least initially, this will incur a roughly 10% increase in CPU and memory usage. We’re working to reduce this in future versions.
  • !logsurf debug command now provides additional log context from sbproxy.log (for WMI, Perfmon, and Ping tasks)
  • Improved PropertySource scheduling to avoid CPU spikes
  • The installer on Windows now confirms a successful install to avoid silent failure
  • Improved NetFlow performance by removing extraneous logging
  • Upgraded AWS SDK from 1.11.431 to 1.11.548

Fixes:

  • Fixed !tplist “STATUS” field that would show OK despite there being an error
28.300Early AccessMay 7, 2019Improvements: 

  • Better monitoring of overall memory and CPU usage via a new Collector DataSource.
  • Reduce collector memory usage for Active Discovery history.
  • Linux collector will create a non-privileged logicmonitor user to run the collector when non-root is selected.
  • Support for running system’s snmpwalk and snmpget commands (useSystem=true)
  • Reduced SSE memory usage for Internal Web Checks
  • Improved WMI error handling logic to avoid gaps and return the real error code in more cases
  • Test Active Discovery for SNMP now returns diagnosis commands for both getNext and getBulk
  • Improve JMX data collection logic to avoid potential data gaps when invalid connections were errantly cached
  • Improved the uninstaller to completely remove the Collector in some scenarios where it was only partially uninstalled

Fixes:

  • Fixed potential memory leak with the ESX collector
  • Fixed an issue where the Windows Collector device name was shown incorrectly as “Unknown”
  • Fixed issue where syslog collector used excessive memory
  • Fixed the error that created a useless folder in the install directory
28.200Early AccessApril 10, 2019Improvements:
 

  • Reduced memory usage for PropertySources
  • CPU usage optimizations
  • Improved instance names on SSE Datasources
  • Improved NetFlow diagnosis messaging
  • Improved Windows EventLog query time range processing to avoid fails queries
  • Changed pdh.auto.switch.to.native.enable to default to true. Also fixed an issue where Perfmon collection would fail when pdh.datacache.enableand pdh.auto.switch.to.native.enable were both set to true
  • JMX collection now supports the special character “:” in MBeans

Fixes:
  • Fixed batchscript collection caching behavior that would cause some instances with duplicate wildvalues to report No Data
  • Fixed password exposure issue with Poll Now Diagnosis for WMI
  • Fixed issue where NetFlow would record corrupt data instead of discarding it
  • Fixed an issue where JobMonitors would alert unexpectedly due to slight clock skew. If the reported time of the job (from the wrapper script) is more than a minute different from Santaba time, we’ll use Santaba time
  • Fixed a condition that could potentially hang the Watchdog and prevent Collector upgrades
28.002Optional General ReleasesApril 2, 2019Fixes: 

  • Fixed batchscript collection caching behavior that would cause some instances with duplicate wildvalues to report No Data.
  • Fixed password exposure issue with Poll Now Diagnosis for WMI.
28.001Optional General ReleasesMarch 21, 2019Fixes: 

  • Fixed issue where JDBC AD and Collection would fail if the domain name contains “-“.
  • Fixed memory leak issue with Groovy tasks.
28.100Early AccessMarch 20, 2019

Improvements:

  • The collector can now run without administrative or root privileges on both Windows and Linux.
    • Administrator/root privileges are still needed for the initial installation.
  • Syslog performance has been improved.
  • Modifications to the JRE keystore are now kept during collector upgrade.

Fixes:

  • Fixed InstallShield Wizard progress bar which didn’t fill, causing unnecessary uncertainty about the process.
  • NetScan will not use ARP to scan hosts outside of the same subnet. This lead to incorrect device types being reported.
  • Fixed a possible memory leak when using SNMPv3.
  • Fixed issue where Ping task would non report data if it timed out.
  • Fixed issue where JDBC AD and Collection would fail if the domain name contains “-“.
  • Fixed memory leak issue with Groovy tasks.
28.000Optional General ReleasesFebruary 27, 2019GD Collector 28.000 will be available February 27th, 2019. This version includes everything in GD 27.001GD 27.002GD 27.003GD 27.004GD 27.005, as well as EA 27.100, EA 27.200, EA 27.300EA 27.400, EA 27.500, EA 27.600, EA 27.700, EA 27.750, EA 27.751, EA 27.800, EA 27.850, EA 27.900. 

In comparison to GD 27.001, highlights of this version include:

  • Property Sources now support token replacement inside Powershell Scripts 
  • Added support for NTLMv2 authentication using wmi.authType
  • More insightful Poll Now error messages and diagnosis
  • Remote Sessions are now supported through a collector configured to use a proxy
  • Improved metrics for SSE and Collector performance monitoring
  • Syslog EventSources now correctly parse Cisco syslog messages lacking a host
  • Cleaned up collector logging
  • Fixed an issue where SSL validation prevented Groovy scripts from running successfully

For more detailed information on what’s included, see individual EA release notes (links above).

27.900Early AccessFebruary 21, 2019
  • Improve Windows Event Log performance in some scenarios
  • Improve AD task duplication logic. Previously, this could result in delayed AD results, which would make AD appear to be broken.
  • Improved AD memory usage
  • Reduced CPU usage for SNMP v3 collection
  • Added hostactive column to !tlist output. When “true”, successful tasks will contribute to the “heartbeat” (see HostStatus DataSource) that signals that the device is alive (or dead in its absence). When “false”, it means the tasks success has no impact on the heartbeat or the collector’s up/down status.
  • Avoid false host down alerts when sbproxy is unexpectedly down.
27.850Early AccessJanuary 23, 2019
  • Improve Windows Event Log performance in some scenarios
  • Improve AD task duplication logic. Previously, this could result in delayed AD results, which would make AD appear to be broken.
  • Improved AD memory usage
  • Reduced CPU usage for SNMP v3 collection
  • Added hostactive column to !tlist output. When “true”, successful tasks will contribute to the “heartbeat” (see HostStatus DataSource) that signals that the device is alive (or dead in its absence). When “false”, it means the tasks success has no impact on the heartbeat or the collector’s up/down status.
  • Avoid false host down alerts when sbproxy is unexpectedly down.
27.800Early AccessJanuary 3, 2019
  • Improved SNMP Poll Now diagnosis messages.
  • Improved Poll Now error messages when running external/uploaded scripts.
  • During upgrade, collector will report any processes it can’t kill that it must kill to upgrade.
  • Installer will warn if collector user lacks required permissions.
  • Various improvements to collector logging.
  • Better -help output for !tlist debug command.
  • Handle SNMP agents that return “noSuchName” in the “error-status” field.
  • Default configuration changes to watchdog.conf:
    • wrapper.logfile.compress.maxfiles changed from 10 to 5
    • wrapper.logfile.maxfiles changed from 3 to 2
  • Default configuration changes to wrapper.conf:
    • wrapper.logfile.compress.maxfiles changed from 10 to 20
    • wrapper.logfile.maxfiles changed from 3 to 2
  • The following configuration directives have been renamed:
    • discover.global.timeoutInSec -> discover.default.timeoutInSec (default 3600)
    • discover.perfmon.timeout -> discover.perfmon.timeoutInSec (default 120)
    • discover.wmi.timeout -> discover.wmi.timeoutInSec (default 120)
  • Added AD script timeout configuration directive discover.script.timeoutInSec with a default value of 300 seconds.
  • Fixed issue where sbwinproxy would use more memory than necessary when communication to the agent was interrupted.
  • Fixed an issue where a PowerShell script would report “The screen cannot be set to the number of lines and columns specified.” when run from Poll Now or the debug window. This happened because the collector tried to set the screen column count to the default value despite it already being set to the default value.
  • Fixed a bug where WMI queries would fail due to an improperly handled error code that requires re-authentication.
  • Fixed issue where ping collection would fail with some firewalls due to sequence ID reuse.
27.751Early AccessDecember 25, 2018
  • Fixed a bug that would cause some collectors to use excessive memory and CPU for garbage collection when monitoring single devices with more than 10,000 instances that are frequently changing.
27.005Required General ReleasesDecember 5, 2018
  • Since 25.200, nonexistent OIDs in AD filters would cause an instance to be filtered out of AD unless the filter was using the NotExist operation. This would lead to unexpected behavior when using other operations like NotEqual, NotContains, and RegexNotMatch. Nonexistent OID responses will now be treated as empty strings (“”) when evaluating with those operations.
  • Token replacement for PropertySources now works in Groovy and PowerShell. We recommend using hostProps.get(), instanceProps.get(), or taskProps.get() in Groovy scripts for better performance than token replacement.
  • Collector will no longer fail to start if DNS resolution from the cache file fails.
  • Fixed issue where sbwinproxy would use more memory than necessary when communication to the agent was interrupted.
27.750Early AccessNovember 22, 2018
  • HTTP collector AD will not append default ports (80, 443) to the “Host” header. Most browsers, and the !http debug command did not append the port to the “Host” header, leading to discrepancies in cases where the remote server could not handle the appended port in the “Host” header.
  • Syslog collection now supports timestamps with microseconds.
  • The collector will delete the locally stored NetFlow database if the file exceeds netflow.datadir.maxSizeInMB directive in agent.conf when NetFlow initializes. This will prevent NetFlow from using excessive collector disk space.
  • When Poll Now fails for Ping, SNMP, or WMI collection, the collector will try to diagnose the problem and include suggestions (as well as the command used to diagnose) in the result.
    • Ping diagnosis calls your collector OS ping binary.
    • SNMP diagnosis uses binaries included with the collector.
    • WMI diagnosis uses PowerShell’s Get-WMIObject Cmdlet.
  • Fixed handling of gzip encoding with the webpage collector.
  • Patched CVE-2016-5725 on JSch 0.1.53.
27.700Early AccessNovember 2, 2018
  • Improved memory efficiency for WMI, Perfmon, and Ping collection.
  • Unused .cab files generated with the !packetcapture debug command are now automatically deleted.
  • Memory usage improvements.
  • Various improvements to logging output.
  • Improved SSE memory usage when consuming the hosts feed, particularly for collectors handling large numbers of instances.
  • Fixed issue where Perfmon collection could interfere with the watchdog heartbeat, resulting in errant host status alerts.
27.004Optional General ReleasesNovember 1, 2018
  • SSE will be automatically disabled on collectors that can’t support it due to insufficient RAM and other edge cases.
  • Improved memory efficiency for WMI, Perfmon, and Ping collection.
  • Improved SSE memory usage when consuming the hosts feed, particularly for collectors handling large numbers of instances.
  • Various stability improvements.
  • Reverted JSch library to 0.1.53 from 0.1.54 to fix a compatibility issue with some Cisco devices.
  • Fixed issue where sbproxy would be errantly terminated.
27.600Early AccessOctober 15, 2018
  • Syslog EventSources now recognize and correctly parse Cisco’s flavor of syslog.
  • Efficiency improvements to the built-in NetApp collector.
  • Trimmed down some excessively long collector event messages.
  • Efficiency improvements for PowerShell scripts.
  • More insightful error messages from Poll Now.
  • NetScan script timeout is now configurable in agent.conf (defaults to 60 seconds).
  • Fixed issue where sbproxy would not restart timely when a collector was restarted from the UI.
  • Fixed issue where sbproxy would be errantly terminated.
  • Fixed a NetFlow bug that would cause data to be discarded if the device id was too large.
  • Fixed an issue that prevented PowerShell scripts from running after upgrading to 27.500.
27.500Early AccessSeptember 13, 2018Includes all fixes in 27.003, Plus: 

  • Added an option to use unique ids per host on icmp polls.
  • Improved metrics for SSE and Collector performance monitoring.
  • Fixed an issue where restarting with a corrupted agentdns.cache file would prevent collector from starting.
27.003Optional General ReleasesSeptember 13, 2018
  • The SSE engine now supports custom lib folders, including relevant paths, for 3rd party jars.
  • Added an option to execute parallel perfmon metric collection for situations where some parent metrics might be invalid.
  • Added additional status monitoring of the Collector Reporter to identify situations where the Collector may be reporting data, but no gathering fully.
  • Fixed a bug where the Collector was being repeatedly restarted by improving the logic that Watchdog uses to restart the collector agent.
  • Fixed a bug in SNMP collection when gathering metrics individually which resulted in “ConcurrentModificationException” errors.
  • Fixed a bug where certain Groovy Scripts would not work and display this error “Cannot schedule task for execution” after disabling the Standalone Scripting Engine.
  • Fixed a bug where “reporter.persistent.queue.consume.rate” config setting was not being used.
  • Fixed a bug where very large host entries would cause an OutOfMemory exception. The script will be scheduled for later execution or SSE will be disabled until next restart when the process does not register within a configured initiation time.
  • Fixed a resource leak in Standalone Scripting Engine and added increased protection for OutOfMemory exceptions and SSE spawning too many processes.
  • Increased security to prevent DLL hijacking in sbwinproxy.
27.400Early AccessAugust 17, 2018
  • Remote Sessions are now supported through a collector configured to use a proxy.
  • Improved PollNow Error messages for Ping and Perfmon datasources to help with troubleshooting.
27.300Early AccessJuly 25, 2018
  • Added ability to specify as specific MySQL JDBC driver jar over the currently provided version.
  • Webpage collection of JSON data is now cached locally to improve performance of reading large data sets.
  • Fixed an issue where TCP Connections were not being reused correctly and creating significantly more open connections than previous versions.
27.002Optional General ReleasesJuly 25, 2018
  • Fixed an issue where SSL Certs validation was preventing certain Groovy Scripts from successfully running.
  • Fixed an issue with the Watchdog process frequently restarting SBProxy process.
  • Fixed an issue where upgrading from 26.XXX to 27.XXX resulted in more variability in Data Collection Task counts. The timeout value for collector.max.init.delay.in.seconds is now defaulted to 600.
  • Fixed an issue when perfmon initialization against a slow endpoint may cause a restart of the sbproxy service.
27.200Early AccessJuly 10, 2018
  • Improved the memory handing of Powershell scripts.
  • Poll Now on JDBC datasources now provides more detailed error messages.
27.001Optional General ReleasesJuly 10, 2018
  • Fixed an issue with JDBC data collection and making TLS connections.
  • SBWinProxy was restarting randomly and impacting the ability to monitor Ping DataSources.
  • Improved the default Memory Allocation around the scripting environment.
  • When proxy.enable=true in agent.conf, the collector will check the proxy certificate for validity. The collector will not connect to Santaba if the certificate fails the validity check.
27.100Early AccessJune 13, 2018
  • PropertySources written in PowerShell now support token replacement.
  • Added support for NTLMv2 authentication using wmi.authType.
27.000Optional General ReleasesJune 12, 2018GD Collector 27.000 will be available June 12, 2018. This version includes everything in GD 26.001, as well as EA 26.100EA 26.200EA 26.201EA 26.300EA 26.400EA 26.500EA 26.600 and 26.601

In comparison to GD 26.001, highlights of this version include:

  • Property Sources now support Powershell Scripts
  • Removed Support for Windows 2003
  • Windows Collector installer and files are now signed
  • Support for Event Source Test Now functionality (similar to Poll Now on datasources)
26.601Early AccessMay 29, 2018We highly encourage everyone using EA Collectors 26.100 – 26.600 to upgrade to this version. This version will become our next Optional General Releases Collector. This release includes the following: 

  • Fixed an installation issue on Windows 2008 R2 where the installer was asking for Proxy information due to connection issues.
  • Fixed a data collection issue related to specific special characters included in SQL statements.
26.600Early AccessMay 17, 2018
  • Fixed an issue with SNMP v3 collection that would result in very high CPU usage.
  • Fixed “WMI Provider load failure” issue.
  • Fixed an issue where certain collector upgrade paths would not maintain/adjust Agent.conf file customizations properly.
26.500Early AccessApril 12, 2018
  • Support for Event Source Test Now functionality (similar to Poll Now on datasources) that is coming in v103.
  • Configuration updates/changes to support the renaming of Services to Websites.
  • Added support for integers with 5 bytes in SNMP.
26.400Early AccessMarch 22, 2018
  • Support for Longer DataSource Collection Intervals.
  • A new property “collector.script.timeout” can be set on an instance, device or group and we use that property value as any script timeouts for instances where the property is applied.
  • We have improved the handling of reporting threads to ensure that collectors with high device counts process tasks more efficiently during heavier loads
26.300Early AccessMarch 4, 2018
  • Groovy Scripting will now support PUT and DELETE methods as part of an updated HTTP java class.
  • Support for the upcoming Log File Event Source Encoding options that allow for choosing or auto-detecting the encoding of collected log sources.
  • Support for the upcoming Powershell support in Property Sources.
26.201Early AccessJanuary 29, 2018
  • Fixed a bug in the Internal Service Check to better support SSL checks on alternative port numbers. 
26.200Early AccessJanuary 26, 2018
  • Support for the upcoming v101 release feature enhancement Property Sources will support PowerShell scripts.
  • With this version of the collector Windows 2003 is no longer supported and will be blocked by installation and upgrades.
  • Service Checks now support the ability to identify SSL errors and halt on them as separate actions.  Therefore the check can identify the SSL error, but continue to confirm the rest of the service functionality.  Use 26.200 to use this feature with Internal Service Checks.
26.001Optional General ReleasesJanuary 23, 2018
  • GD 26.001 fixes an issue identified in GD 26.000 that could affect LogicMonitor performance. If you are running 26.000, please update to this new 26.001 version.
26.100Early AccessJanuary 16, 2018
  • Improved stability of scripted Data Collection and Active Discovery.
  • With v100, Windows Collector installers will be signed for enhanced security.
  • Previously, if the Collector requested ESX data during a refresh of the ESX server, it would report “No Data” until the Collector was restarted. This has been improved so that the Collector can recover without requiring a restart.
  • Added support for TLS 1.1/1.2 for MySQL and SQL Server.
26.0Optional General ReleasesJanuary 4, 2018
  • This version includes everything in GD 25.001, as well as EA 25.100, EA 25.200, EA 25.300, and EA 25.400.
  • Improved speed and performance of NetScans.
  • Support for SSL Expiration tracking and alerting for Service Checks.
  • Support for groovy scripts to define a Config Check in LM ConfigSources
25.400Early AccessDecember 18, 2017
  • Improved WMI performance and capacity.
  • Improved Active Discovery and Auto-Property processes to prevent duplicate tasks and reduce memory usage.
  • Increased the timeout of SNMP Active Discovery tasks to 300 seconds. This can be modified via the ad.snmp.walk.timeout parameter in agent.conf
  • Improved snmpwalk timeout logic.
25.300Early AccessNovember 9, 2017
  • Significant performance improvements for Perfmon collection.
  • Performance and capacity improvements for WMI collection.
  • Windows Collector Installer has been improved to better explain permissions/installation instructions. It will now automatically detect if the computer is on the domain and show a separate Domain field only in this case.
  • Support for SSL expiration monitoring in v97.
25.001Optional General ReleasesOctober 25, 2017
  • GD 25.001 will be released October 25th, 2017 to replace GD 25.000, which was released early September. We have subsequently identified an issue in GD 25.000 that could cause problems with PowerShell script execution under certain conditions. With GD 25.000, we improved the ability of the Collector to trap PowerShell exceptions, and it is possible this would terminate PowerShell script execution for otherwise harmless errors. We have corrected and thoroughly tested this in GD 25.001.
25.200Early AccessOctober 19, 2017
  • Improved the speed and performance of NetScan. Added Npcap packet capture for MAC address detection and lookup of network interface manufacturer.
  • You can now use groovy scripts to define a Config Check in LM ConfigSources.
  • To avoid ping packages from being dropped by firewalls, we have reduced the Collector’s default ping packet size. To change this, you can modify the ‘ping.payload.size’ parameter in the Collector’s service.conf file
  • Removed the !get debug command.
25.0Optional General ReleasesSeptember 8, 2017
  • This version includes everything in MGD 24.002, as well as EA 24.085, EA 24.126, EA 24.200, and EA 24.300.
  • Easy Capacity Tuning – Navigate to the Collector configuration window and select a new Collector size (Small, Medium, or Large) to automatically update the necessary parameters and instantly increase or decrease the Collector’s capacity.
  • Support for IPv6 for all data collection methods and Internal Service checks (not including traceroute, yet).
  • Faster Collector download – When adding a Collector, select ‘bootstrap’ to download and install Collectors much faster via the LogicMonitor CDN.
24.300Early AccessAugust 25, 2017
  • Faster Collector download! When adding a Collector version 24.300 or higher with v94, you will notice the option to download a bootstrap as opposed to the full Collector package. The bootstrap is a smaller installation package that enables you to download and install Collectors much faster via the LogicMonitor CDN.
  • Added a service.config tab to the Collector Configuration window. This is useful for configuring a proxy and other settings for Internal Service checks.
  • SNMP performance improvements to reduce the Collector’s CPU utilization.
  • Reduced the amount of memory used by ConfigSources.
24.126Early AccessJuly 14, 2017
  • This version supports one click capacity optimization. You can now navigate to the Collector configuration window and select a new Collector size (Small, Medium, or Large) from a dropdown menu.
  • Added a sanity check to any configuration changes made via the UI
  • Several improvements to support IPv6 for all data collection methods.
  • Added the ability to configure a proxy for Internal Service checks. This configuration is set in the Collector’s service.conf file
24.002Required General ReleasesJune 29, 2017
  • This Collector includes all features available in 24.001 as well as the following changes:
  • Improved the logic behind the Collector upgrade process to ensure that custom script and jar files are not inadvertently deleted during upgrade.
  • Fixed an issue causing double backslashes to be interpreted incorrectly in Powershell scripts.
  • Improved DNS resolve to prevent service checks from failing due to containing “://”
In This Article